• Telephone: (631) 956-3703   |
  • Email: uniquedistinc@gmail.com
  • 0
  • 0
ATK23X
Crossover

AUTOTEK

ATK23X

3-Way Active Crossover with Bass Remote Control

0
2XS
Crossover

Audio Control

2XS

A state-variable, 18dB/octave, 2-way electronic crossover designed with a flexible and accurate module-programmable crossover frequency. Our exclusive Programmable Frequency Match (PFM) subsonic filter provides exceptional bass control. Winner of the coveted CES “Design and Engineering Excellence Award.”

Features:

  • Two channel operation
  • Precise 2-way 18dB/octave, programmable electronic crossover with a plug-in module
  • Programmable Frequency Match (PFM) subsonic filter
  • Balanced inputs
  • On-board line driver for signal gain
  • Output level controls
  • Selectable ground isolation
  • Optimum signal output indicator LEDs
  • The finest quality – designed and built in America

0
XM5
Crossover

DS18

XM5

5 Way Pro Audio Crossover

0
PRO2.6S
Crossover

TARAMPS GROUP

PRO2.6S

PRO 2.6S

Taramps Audio Processor

Always dedicated to improving your experience with your car audio system, Taramps innovated again by producing the PRO2.6S audio processor.  DSP, 2 independent inputs and 6 outputs, it has features such as routing, crossover filters, delay adjustment, alignment, phase inversion, adjustable limiter, parametric equalizer on outputs, mirroring, mute, sinusoidal wave generator and memory for settings . Taramps, always working to make your audio system more complete and easier to handle.

0
TRIXO
Crossover

Massive

TRIXO

3 WAY ELECTRONIC CROSSOVER 18DB

0
PROCFX
Crossover

DS18

PROCFX

2-WAY PASSIVE CROSSOVER

0
XM3
Crossover

DS18

XM3

3-WAY ACTIVE CROSSOVER

0
XM6LD
Crossover

DS18

XM6LD

6-WAY ACTIVE CROSSOVER

0
CRX5
Crossover

TARAMPS GROUP

CRX5

TECHNICAL INFORMATION

ADDITIONAL INFORMATION
Quantidades de vias: 5

Pass Thru Way( R+L )
Selectable phase: 0/180º

Low Way (R+L) Mono
Subsonic Filter: Selectable (Bypass/40/60/80Hz)(-24dB/8ª butterworth)
Low Pass Filter: Variable 100Hz ~2KHz (-12dB/8ª Linkwitz-Riley)
Bass Boost: Variable 0 ~+10dB (40Hz)
Selectable phase: 0/180º

Low Mid Way (R+L) Mono
High Pass Filter: Variable 30Hz ~ 600Hz (-12dB/8ª Linkwitz-Riley)
Low Pass Filter: Variable 600Hz ~10KHz (-12dB/8ª Linkwitz-Riley)
Selectable phase: 0/180º

High Mid Way (R e L) Stereo
High Pass Filter: Variable 400Hz ~ 3KHz (-12dB/8ª Linkwitz-Riley)
Low Pass Filter: Variable 5KHz ~20KHz (-12dB/8ª Linkwitz-Riley)
Selectable phase: 0/180º

High Way (R e L) Stereo
High Pass Filter: Variable 2KHz ~ 10KHz (-12dB/8ª Linkwitz-Riley)
Selectable phase: 0/180º

Input Impedance: 10K ohms
Output Impedance: 470K ohms
Maximum input level R/L: 4,57V RMS (+15,4 dBu)
Maximum output level R/L: 9,3V RMS (+21,6 dBu)
Maximum output Pass Thru R/L: 9,3V RMS (+21,6 dBu)

Crosstalk: >85dB
Protection: Reverse polarity
Voltage Range: 10,5 ~16VDC
Nominal Consumption (12.6): 420mA @ 12,6 Vcc
Dimensions (WxHxD): 9.37" x 1.57" x 5.71"
Weight: 1.54lb

0
CRX4
Crossover

TARAMPS GROUP

CRX4

TECHNICAL INFORMATION

OUTPUT IMPEDANCE 27k ohms
MAXIMUM INPUT LEVEL 8V RMS
MAXIMUM OUTPUT LEVEL 8V RMS
CROSSTALK (SEPARATION BETWEEN CHANNELS) >80dB
POWER SUPPLY VOLTAGE 10 ~15.5VDC
PROTECTION SYSTEM Against polarity reversal
NUMBER OF WAYS 4
LOW WAY (MONO) Frequency cut / Variable (LPF): 40Hz ~275Hz (-12dB/8th)
BASS BOOST Variable Central Frequency: 20 ~65Hz (Fixed Gain 6dB)
LOW MID WAY (MONO) Minimum frequency of HPF cut / Variable: 25Hz ~ 140Hz (-12dB/8th)
Maximum frequency of LPF cut / Variable: 300Hz ~7.5Hz (-12dB/8th)
HIGH MID WAY (STEREO) Minimum frequency of HPF cut / Variable: 200Hz ~5KHz (-12dB/8th)
Maximum frequency of LPF cut / Variable: 1.2KHz ~ 12KHz(-12dB/8th)
HIGH WAY (STEREO) Frequency cut / Variable: 550Hz ~13.7KHz (-12dB/8th)
DIMENSIONS (H X W X D) 7.480 x 1.574 x 5.708 inches (190 x 40 x 145 mm)
WEIGHT 1.234 lbs (0.560 kg)
EAN 7898556840118
ADDITIONAL INFORMATION
Power supply: With switched-mode DC-DC converter
Voltage Range: 10 ~ 15.5VDC
Nominal Consumption (12.6V): 0.38A

0