• Telephone: (631) 956-3703   |
  • Email: uniquedistinc@gmail.com
  • 0
  • 0

Shop

All Categories
MM1020.4
Amplifiers

AUTOTEK

MM1020.4

MEAN MACHINE 1000 Watt 4 Channel Amplifier Bridgeable Car Audio Amp

 

0
ATEQ7B
Sound Processors

AUTOTEK

ATEQ7B

7-Band Equalizer with 9-Volt Line-Driver

0
ATK23X
Sound Processors

AUTOTEK

ATK23X

3-Way Active Crossover with Bass Remote Control

0
AYA2100.4
Amplifiers

AUTOTEK

AYA2100.4

 2100 Watts Alloy Four Channel Car Audio Amplifier

0
AYA2100.1
Amplifiers

AUTOTEK

AYA2100.1

2100 Watts Alloy Mono Subwoofer Car Audio Amplifier

0
AYA1100.1
Amplifiers

AUTOTEK

AYA1100.1

1100 Watts Alloy Mono Subwoofer Car Audio Amplifier

0
MM4020.1D

AUTOTEK

MM4020.1D

MEAN MACHINE 4000 Watt Mono Amplifier 1-Ohm Stable Car Audio Amp

0
MM2020.4

AUTOTEK

MM2020.4

MEAN MACHINE 2000 Watt 4 Channel Amplifier Bridgeable Car Audio Amp

0
ASM1200.4

AUTOTEK

ASM1200.4

Description
Autotek ASM Series delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and high-level inputs. 1200 watt four channel car audio amplifier

Category: Street Machine ASM
SKU: 806576228721
Part #: ASM-1200.4

Specifications

  • Class
    Class A/B
  • Total Channels
    4
  • Power @ 1 Ohm
    N/A
  • Power @ 2 Ohms
    4 x 300 @ 2 Ohms
  • Power @ 4 Ohms
    4 x 150 @ 4 Ohms
  • Mono Bridged @ 4 Ohms
    2 x 600 Watts @ 4 Ohms Bridged
  • Crossover
    Switchable
    Full/HPF/LPF
  • Variable High Pass Crossover 12dB per Octave
    60Hz-1.2kHz
  • Variable Low Pass Crossover 12dB per Octave
    30Hz-250Hz
  • Tone Control/Parametric EQ
    Built-in bass control
  • Bass Boost
    0 - 9dB
  • Variable Voltage
    6V - 0.2V
  • Signal to Noise
    >95dB
  • Frequency Response
    10Hz-45KHz
  • Total Harmonic Distortion (THD)
    <0.05%
  • Speaker Level Audio Inputs
    Small Connector (MOLEX) to drive "Hi Input"
  • Pre Amp Audio Outputs
    1 Pair
    Full Range
    RCA
  • Power Terminal 12v/GND
    Spade Connector
    Recommended
  • Speaker Terminal Wire Gauge
    Spade Connector
    Recommended
  • Fusing
    15 x 2

 

Features & Benefits

  • Low Noise Preamplifier Circuitry
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • RCA Inputs
    RCA inputs and outputs provide the highest sound quality connection
  • Hi Level Inputs
    High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
  • Operation Mode
    4 channel operation mode allows either stereo or mono bridged operation
  • Crossover Type
    Switched
    FULL / LPF / HPF for complete control of amplifier signal which is essential when using two or more amplifiers
  • Electronic Equalizer
    Electronic equalizer provides control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers
  • Class / Topology
    Class A/B amplifiers have larger heatsinks with very musical bass
  • Output Device Technology
    ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • Heat Sink
    Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heatsink underside
  • Power Supply
    High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Output Connections
    High tension connection terminals allow for secure connection and resist erosion
  • Connection Type
    High torque connectors provide easy access for hand tools allowing a quick and secure connection
  • Full-Range RCA Outputs for Signal Pass Through
    Preamp RCA outputs to daisy chain multiple amps eliminate additional signal cables from the source unit
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
  • Parametric / Signal Contouring
    Variable High Pass Crossover
    60Hz-1.2kHz
    12dB per Octave

    Variable Low Pass Crossover
    30Hz-250Hz
    12dB per Octave

    Bass Boost
    0 - 9dB

0
ASM1200.2

AUTOTEK

ASM1200.2

Description
Autotek ASM Series delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and high-level inputs. 1200 watt two channel car audio amplifier

Category: Street Machine ASM
SKU: 806576228714
Part #: ASM-1200.2

Specifications

  • Class
    Class A/B
  • Total Channels
    2
  • Power @ 1 Ohm
    N/A
  • Power @ 2 Ohms
    2 x 600 @ 2 Ohms
  • Power @ 4 Ohms
    2 x 300 @ 4 Ohms
  • Mono Bridged @ 4 Ohms
    1 x 1200 @ 4 Ohms Bridged
  • Crossover
    Switchable
    Full/HPF/LPF
  • Variable High Pass Crossover 12dB per Octave
    60Hz-1.2kHz
  • Variable Low Pass Crossover 12dB per Octave
    30Hz-250Hz
  • Tone Control/Parametric EQ
    Built-in bass control
  • Bass Boost
    0 - 9dB
  • Variable Voltage
    6V - 0.2V
  • Signal to Noise
    >95dB
  • Frequency Response
    10Hz-45KHz
  • Total Harmonic Distortion (THD)
    <0.05%
  • Speaker Level Audio Inputs
    Small Connector (MOLEX) to drive "Hi Input"
  • Pre Amp Audio Outputs
    1 Pair
    Full Range
    RCA
  • Power Terminal 12v/GND
    Spade Connector
    Recommended
  • Speaker Terminal Wire Gauge
    Spade Connector
    Recommended
  • Fusing
    20 x 1

 

Features & Benefits

  • Low Noise Preamplifier Circuitry
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • RCA Inputs
    RCA inputs and outputs provide the highest sound quality connection
  • Hi Level Inputs
    High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
  • Operation Mode
    2 channel operation mode allows either stereo or mono bridged operation
  • Crossover Type
    Switched
    FULL / LPF / HPF for complete control of amplifier signal which is essential when using two or more amplifiers
  • Electronic Equalizer
    Electronic equalizer provides control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers
  • Class / Topology
    Class A/B amplifiers have larger heatsinks with very musical bass
  • Output Device Technology
    ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • Heat Sink
    Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heatsink underside
  • Power Supply
    High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Output Connections
    High tension connection terminals allow for secure connection and resist erosion
  • Connection Type
    High torque connectors provide easy access for hand tools allowing a quick and secure connection
  • Full-Range RCA Outputs for Signal Pass Through
    Preamp RCA outputs to daisy chain multiple amps eliminate additional signal cables from the source unit
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
  • Parametric / Signal Contouring
    Variable Low Pass Crossover
    40Hz-150Hz
    12dB per Octave

    Bass Boost
    0 - 9dB

 

0
ASM1800.1

AUTOTEK

ASM1800.1

Description
Autotek ASM Series delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and a bass remote in a 1800 watt mono subwoofer car audio amplifier.

Category: Street Machine ASM
SKU: 806576228707
Part #: ASM-1800.1

Specifications

  • Class
    Class A/B
  • Total Channels
    1
  • Power @ 1 Ohm
    N/A
  • Power @ 2 Ohms
    1 x 1800 @ 2 Ohms
  • Power @ 4 Ohms
    1 x 900 @ 4 Ohms
  • Mono Bridged @ 4 Ohms
    N/A
  • Crossover
    Switchable
    Full/LPF
  • Variable Low Pass Crossover 12dB per Octave
    40Hz-150Hz
  • Tone Control/Parametric EQ
    Built-in bass control
  • Bass Boost
    0 - 9dB
  • Variable Voltage
    6V - 0.2V
  • Signal to Noise
    >90dB
  • Frequency Response
    10Hz - 250Hz
  • Total Harmonic Distortion (THD)
    <0.10%
  • Speaker Level Audio Inputs
    Small Connector (MOLEX) to drive "Hi Input"
  • Power Terminal 12v/GND
    Spade Connector
    Recommended
  • Speaker Terminal Wire Gauge
    Spade Connector
    Recommended
  • Fusing
    20 x 2

 

Features & Benefits

  • Low Noise Preamplifier Circuitry
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • RCA Inputs
    RCA inputs and outputs provide the highest sound quality connection
  • Hi Level Inputs
    High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
  • Operation Mode
    Mono only
  • Crossover Type
    Fully Adjustable 12dB Electronic Crossovers
  • Electronic Equalizer
    Electronic equalizer provides control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers
  • Class / Topology
    Class A/B amplifiers have larger heatsinks with very musical bass
  • Output Device Technology
    ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • Heat Sink
    Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heatsink underside
  • Power Supply
    High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Output Connections
    High tension connection terminals allow for secure connection and resist erosion
  • Connection Type
    High torque connectors provide easy access for hand tools allowing a quick and secure connection
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
  • Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
  • Parametric / Signal Contouring
    Variable Low Pass Crossover
    40Hz-150Hz
    12dB per Octave

    Bass Boost
    0 - 9dB

0
ASM1200.1

AUTOTEK

ASM1200.1

Description
Autotek ASM Series delivers huge power in an efficient heatsink. Features include built-in electronic crossovers and a bass remote in a 1200 watt mono subwoofer car audio amplifier.

Category: Street Machine ASM
SKU: 806576228691
Part #: ASM-1200.1

Specifications

  • Class
    Class A/B
  • Total Channels
    1
  • Power @ 1 Ohm
    N/A
  • Power @ 2 Ohms
    1 x 1200 @ 2 Ohms
  • Power @ 4 Ohms
    1 x 600 @ 4 Ohms
  • Mono Bridged @ 4 Ohms
    N/A
  • Crossover
    Switchable
    Full/LPF
  • Variable Low Pass Crossover 12dB per Octave
    40Hz-150Hz
  • Tone Control/Parametric EQ
    Built-in bass control
  • Bass Boost
    0 - 9dB
  • Variable Voltage
    6V - 0.2V
  • Signal to Noise
    >90dB
  • Frequency Response
    10Hz - 250Hz
  • Total Harmonic Distortion (THD)
    <0.10%
  • Speaker Level Audio Inputs
    Small Connector (MOLEX) to drive "Hi Input"
  • Power Terminal 12v/GND
    Spade Connector
    Recommended
  • Speaker Terminal Wire Gauge
    Spade Connector
    Recommended
  • Fusing
    25 x 1

 

Features & Benefits

  • Low Noise Preamplifier Circuitry
    Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process
  • RCA Inputs
    RCA inputs and outputs provide the highest sound quality connection
  • Hi Level Inputs
    High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
  • Operation Mode
    Mono only
  • Crossover Type
    Fully Adjustable 12dB Electronic Crossovers
  • Electronic Equalizer
    Electronic equalizer provides control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers
  • Class / Topology
    Class A/B amplifiers have larger heatsinks with very musical bass
  • Output Device Technology
    ROAD WORTHY™ TCID (Twin Coil Isolation Design) and PRO-FI™ High Speed MOSFETS bring extreme power with high sound quality and minimum distortion levels
  • Heat Sink
    Heavy-duty aluminum alloy heatsink with illuminated connectors provide a blue wash of light from the heatsink underside
  • Power Supply
    High energy PWM (Pulse Width Modulated) power supply provides MAXXimum power with minimal electrical impact
  • Output Connections
    High tension connection terminals allow for secure connection and resist erosion
  • Connection Type
    High torque connectors provide easy access for hand tools allowing a quick and secure connection
  • LED System Protection Circuitry Diagnostics
    Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
  • Bass Remote Included
    Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
  • Parametric / Signal Contouring
    Variable Low Pass Crossover
    40Hz-150Hz
    12dB per Octave

    Bass Boost
    0 - 9dB

0
MM4020.4

AUTOTEK

MM4020.4

MEAN MACHINE 4000 Watt 4 Channel Amplifier Bridgeable Car Audio Amp

0
MM3020.1D

AUTOTEK

MM3020.1D

MEAN MACHINE 3000 Watt Mono Amplifier 1-Ohm Stable Car Audio Amp

0
MM2020.1D

AUTOTEK

MM2020.1D

 MEAN MACHINE 2000 Watt Mono Amplifier 1-Ohm Stable Car Audio Amp

0