• Telephone: (631) 956-3703   |
  • Email: uniquedistinc@gmail.com
  • 0
  • 0

Shop

All Categories
FD07B
New
Wire Harnesses/Antenna Adapters

Scosche

FD07B

Amplifier Bypass Harness for Select 1989-1994 Ford Vehicles

 

0
FD06B
New
Wire Harnesses/Antenna Adapters

Scosche

FD06B

1989-94 Ford Premium Sound Audio Input wire harness; Speaker wire to 8-Pin dash/amp plug

  • Connects an aftermarket stereo to the factory amplified system
  • Not compatible with non-amplified factory systems
  • Direct Connection to the factory ahrness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
FD05B
New
Wire Harnesses/Antenna Adapters

Scosche

FD05B

1989-94 Ford Premium Sound Amp Output wire harness; Output wire harness to Speaker wires at Amp location

  • Connects an aftermarket stereo bypassing the factory amplified system
  • Not Compatible with non-amplified factory systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
FD04B
New
Wire Harnesses/Antenna Adapters

Scosche

FD04B

1989-94 Ford Premium Sound Amp Input-side wire harness; 4 CH RCA at Amp location

  • Connects an aftermarket stereo to the factory amplified system
  • Not compatible with non-amplified factory systems
  • Direct Connection to the factory ahrness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
FD03B
New
Wire Harnesses/Antenna Adapters

Scosche

FD03B

1989-94 Ford Premium Sound Audio Input wire harness; 4 CH RCA to 8-Pin dash/amp plug

  • Connects an aftermarket stereo to the factory amplified system
  • Not compatible with non-amplified factory systems
  • Direct Connection to the factory ahrness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
FD02B
New
Wire Harnesses/Antenna Adapters

Scosche

FD02B

1986-97 Ford Power/Speaker wire harness

  • Connects an aftermarket stereo to the factory radio harnesses
  • Not compatible with factory amplified systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
DO01B
New
Wire Harnesses/Antenna Adapters

Scosche

DO01B

1999-02 Daewoo Power/Speaker wire harness

  • Connects an aftermarket stereo to the factory radio harnesses
  • Not compatible with factory amplified systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
CR05B
New
Wire Harnesses/Antenna Adapters

Scosche

CR05B

2002-07 Chrysler, Dodge, Factory Amplified system wire harness; Power/4-CH RCA inputs

  • Connects an aftermarket stereo to the factory amplified system
  • Not compatible with non-amplified factory systems
  • Direct Connection to the factory ahrness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
CR04B
New
Wire Harnesses/Antenna Adapters

Scosche

CR04B

2005-07 Dodge Dakota, 2007 Mitsubishi Raider Power/Speaker wire harness

  • Connects an aftermarket stereo to the factory radio harnesses
  • Not compatible with factory amplified systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
CR02B
New
Wire Harnesses/Antenna Adapters

Scosche

CR02B

2002-07 Chrysler, Dodge, Jeep, Plymouth Power/Speaker wire harness

  • Scosche CRO2B wiring harness connects an aftermarket stereo to the factory radio harnesses
  • Not compatible with factory amplified systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
CR01B
New
Wire Harnesses/Antenna Adapters

Scosche

CR01B

1984-01 Chrysler Power/Speaker wire harness

  • Connects an aftermarket stereo to the factory radio harnesses
  • Not compatible with factory amplified systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
BW02B
New
Wire Harnesses/Antenna Adapters

Scosche

BW02B

1992-02 BMW Factory Amplified System wire harness, Power/4-CH RCA input to 8-Pin

  • Connects an aftermarket stereo to the factory radio harnesses
  • Not compatible with factory amplified systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
BW01B
New
Wire Harnesses/Antenna Adapters

Scosche

BW01B

1990-05 Select BMW/Mini Power/Speaker wire harness

  • Connects an aftermarket stereo to the factory radio harnesses
  • Not compatible with factory amplified systems
  • Direct Connection to the factory harness without cutting any wires
  • Manufactured with factory quality wire and connectors
  • Standard color coded wires for an easier installation

0
HRNANTSAT2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNANTSAT2

  • connects SiriusXM satellite radio tuner to vehicle's stock satellite radio antenna
  • FAKRA-to-SMB adapter cable
  • compatible with SiriusXM SXV100, SXV200 and SXV300

0
HRNANTSAT1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNANTSAT1

  • connects SiriusXM satellite radio tuner to vehicle's stock satellite radio antenna
  • FAKRA-to-SMB adapter cable
  • compatible with SiriusXM SXV100, SXV200 and SXV300

0
ACCUSBTO3
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBTO3

Metra's ACC-USB-TO3 cable allows you to keep the USB port in select 2018-up Toyota vehicles when installing a new car stereo.

One end of the cable connects to the plug just behind the USB port on your vehicle's console, while the other end plugs into the rear USB port on your new car stereo.

0
ACCUSBTO2
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBTO2

iDatalink ACC-USB-TO2 Connects the factory USB port and cable to a full-size USB male connector in select Toyota vehicles.

0
ACCUSBSU2
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBSU2

Subaru USB Retention for Aftermarket Radio

Connects the factory USB port to an aftermarket radio in select Subaru vehicles

0
ACCUSBSU1
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBSU1

 

Keep your aftermarket radio fully connected with this iDatalink Maestro Subaru USB adapter.

Connect one end of this adapter to your vehicle and the other to the rear of an aftermarket radio to maintain full USB functionality.

This iDatalink Maestro Subaru USB adapter can also retain the functionality of the 3.5mm auxiliary port for extra audio input options.

0
ACCUSBRAM
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBRAM

• Retains USB Port When Installing Aftermarket Stereo
• Plug-and-Play Installation
• Fits select Dodge Ram Trucks

0
ACCUSBHK2
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBHK2

USB adapter for select Hyundai/Kia vehicles.

Replaces the Media Hub circuit board in the center console so that a USB port can be connected to an aftermarket radio USB input.

0
ACCUSBHK1
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBHK1

USB adapter for select Hyundai/Kia vehicles.

Replaces the Media Hub circuit board in the center console so that a USB port can be connected to an aftermarket radio USB input.

0
ACCUSBHD2
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSBHD2

Amplifier bypass for 2014-up Harley Davidson Motorcycles with up to 4 factory amplifiers.

Can be used when adding an aftermarket amplifier or when installing an aftermarket radio.

0
ACCUSB2
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSB2

Metra's ACC-USB2 cable allows you to keep the USB port in 2012-up Honda, Subaru, and Toyota vehicles when installing a new car stereo.

One end of the cable connects to the plug just behind the USB port on your vehicle's console, while the other end plugs into the USB port on your new car stereo (it must have a rear USB port).

0
ACCUSB1
Wire Harnesses/Antenna Adapters

Arctic Start

ACCUSB1

  • Use this Maestro USB1 cable when adding an aftermarket radio to your vehicle. It converts the standard factory cable to a full-size male USB connector.
  • Compatible with most aftermarket stereos for perfect fit and proper use.
  • Connects two USB-enabled components and converts factory USB cable port into standard full-size male USB so it can be plugged into aftermarket stereos.
  • Copper wires with plastic plugs for long-lasting use.
  • Weather-resistant design along with resistance to rust and corrosion for use even in harsh conditions.

0
ACCSATTO2
Wire Harnesses/Antenna Adapters

Arctic Start

ACCSATTO2

  • adapts Toyota satellite radio and GPS antennas to aftermarket receivers
  • plugs connect directly to factory connectors

0
ACCSATTO1
Wire Harnesses/Antenna Adapters

Arctic Start

ACCSATTO1

  • connect a SiriusXM satellite radio tuner to the factory satellite antenna in select Toyota vehicles
  • works with Toyota vehicles equipped with satellite radio built into the factory radio.

0
HRNAVGM2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNAVGM2

  • retain the use of your GM vehicle's Rear Seat Entertainment System
  • also requires the Maestro ADS-MRR module and GM-specific harness
  • connects audio input on rear seat control panel to your new car stereo (requires a rear audio input)

0
HRNAVCH1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNAVCH1

  • allows installation of a new receiver in select Chrysler vehicles (also requires the Maestro ADS-MRR module)
  • displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
  • works with iDatalink adapter to retain use of Rear Seat Entertainment (RSE) monitor

0
HRNRRMI1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRMI1

Radio replacement T-harness for select Mitsubishi Vehicles.

Greatly simplifies the installation of the Maestro RR or RR2 module.

0
HRNRRHO2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRHO2

  • allows installation of a new iDatalink-ready car stereo in select Honda vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls, factory Bluetooth, and aux input, plus factory amp and secondary vehicle display (if equipped)
  • also retains your Honda backup camera and lane watch camera (if equipped)
  • displays engine data and vehicle info onscreen

0
HRNRRHO1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRHO1

  • allows installation of a new car stereo in select Honda vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls and factory amp
  • also retains aux input and Bluetooth with select Alpine, JVC, Kenwood and Pioneer receivers
  • displays engine data and vehicle info onscreen with select Alpine, JVC, Kenwood and Pioneer receivers

0
HRNRRHK3
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRHK3

 

Radio replacement T-Harness for select Hyundai and Kia vehicles 2016 and up.

Greatly simplifies the installation of the Maestro RR module sold separately.

0
HRNRRHK2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRHK2

Plug and play harness for select Hyundai/Kia vehicles.

Simplifies the installation of the Maestro RR module in these application.

0
HRNRRHK1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRHK1

  • allows installation of new iDatalink-compatible receiver in select Hyundai and Kia vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls in select vehicles
  • retains factory backup camera and front camera (receiver must have a second camera input)
  • displays engine performance data on touchscreen

0
HRNRRHD2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRHD2

  • allows installation of a new iDatalink-ready receiver in select Harley-Davidson motorcycles
  • retains handlebar audio controls and factory amp (also requires the Maestro ADS-MRR module)
  • retains Front Camera Auto Control feature (new radio must have 2nd camera input)
  • view select vehicle information and gauges on your radio's screen
  • provides parking brake and speed pulse outputs for NAV receivers
  • non-iDatalink radio can also be installed, but only retains handlebar audio controls

0
HRNRRHD1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRHD1

Radio Replacement Harness for 2006-2013 Harley Davidson Motorcycles.

0
HRNRRGM5
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRGM5

  • allows installation of a new receiver in select GM vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls, OnStar, safety warning chimes, and your factory amp
  • displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers

0
HRNRRGM4
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRGM4

  • allows installation of a new receiver with an iDatalink port in select GM vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls
  • retains OnStar and Bluetooth hands-free operation
  • displays engine performance data on touchscreen

0
HRNRRGM3
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRGM3

  • allows installation of a new receiver with an iDatalink port in select GM vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls and warning chimes
  • retains OnStar (with Bluetooth), factory backup cam, vehicle customization options
  • displays engine performance data on touchscreen

0
HRNRRGM2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRGM2

  • allows installation of a new receiver in select GM vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls, OnStar®, factory amp, and warning chimes with any car stereo
  • also retains Bluetooth, USB media player, backup camera, and Retained Accessory Power with an iDatalink-ready radio

0
HRNRRFO3
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRFO3

  • allows installation of a new iDatalink-ready receiver in select Ford trucks (also requires the Maestro ADS-MRR or ADS-MRR2 module)
  • retains steering wheel controls, factory amp, backup cam, SYNC, and Bluetooth

0
HRNRRFO2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRFO2

  • allows installation of a new receiver in select Ford models (also requires the Maestro ADS-MRR module)
  • retains steering wheel controls and factory amp in select vehicles
  • retains most SYNC features with select Alpine, JVC, Kenwood and Pioneer receivers
  • displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers

0
HRNRRFO1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRFO1

  • allows installation of a new receiver in select Ford-built vehicles (also requires the Maestro ADS-MRR module)
  • displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
  • retains the use of your steering wheel audio controls and factory amp

0
HRNRRFI1
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRFI1

  • allows installation of a new car stereo in select Fiat vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls and factory amp
  • adds extra functionality when you install an iDatalink-compatible car stereo
    • retains the use of the Blue&Me features (media player, hands-free calling, and Bluetooth streaming)
    • allows you to view gauges that display engine performance and other vehicle info on your receiver's screen

0
HRNRRCHK
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRCHK

Replacement Harness Kit for Maestro RR 

0
HRNRRCH3
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRCH3

  • allows installation of a new receiver with iDatalink port in select Chrysler vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls and factory amp
  • displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers

0
HRNRRCH2
Wire Harnesses/Antenna Adapters

Arctic Start

HRNRRCH2

  • allows installation of a new receiver in select Chrysler vehicles (also requires the Maestro ADS-MRR module)
  • retains the use of your steering wheel audio controls and factory amp in select vehicles
  • displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers

0