Single 8" 400W Party Pack

• XL-WB8 Single 8" Thin Ported Enclosure
• ASA3-200.2  2 Channel 400W Amplifier
• ATK-8C 8GA Wiring Kit

Dual 12" 1100W Party Pack

• PS-WB122 Dual 12" Sub Enclosure
• ASA3-400.2  2 Channel 800W Power Amplifier
• ATK-8C 8GA Wiring Kit

Single 12" 550W Party Pack

• PS-WB121 Single 12" Sub Enclosure
• ASA3-300.2  2 Channel 600W Power Amplifier
• ATK-8C 8GA Wiring Kit

Single 12" 600W Party Pack

• PS-WB121T Single 12" Thin Sub Enclosure
• ASA3-300.2  2 Channel 600W Power Amplifier
• ATK-8C 8GA Wiring Kit

Dual 10" 1000W Party Pack

• PS-WB102 Dual 10" Sub Enclosure
• ASA3-400.2  2 Channel 800W Power Amplifier
• ATK-8C 8GA Wiring Kit

Single 10" 500W Party Pack

• PS-WB101 Single 10" Sun Enclosure
• ASA3-300.2  2 Channel 600W Power Amplifier
• ATK-8C 8GA Wiring Kit

Single 10" 550W Party Pack

• PS-WB101T Single 10" Thin Sub Enclosure
• ASA3-300.2   2 Channel 600W Power Amplifier
• ATK-8C 8GA Wiring Kit

• Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum  Enclosure with Dynamic Damping
• 8” Injection Molded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 150 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 9.75"W x 2.75"H x 13.5"D

• Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum  Enclosure with Dynamic Damping
• 10” Injection Molded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 200 Watt High Efficiency Class D Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 10.9"W x 3.2"H x 14.4"D

• Single 10" 175 Watt RMS Amplified Downfiring Enclosure
• Computer Optimized 10" Thin Subwoofer Enclosure
• Custom Injected Molded Cone
• Large Roll Rubber Surround
• 2" Vented KSV Voice Coil Former
• Perimeter Aero Voice Coil Venting
• Poly-carbonate/Glass Fiber Composite Turbine Basket
• Chrome Push Terminals
• 2-Tone Vinyl/Carpet Finish
• 1-Channel 275 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level RCA input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz - 200Hz
• Variable 12db Bass Boost EQ @ 45Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Wired Remote Gain Control Included
• Down Firing Air Suspension Enclosure
• Heavy-Duty Reinforced Box Design
• Mounting Hardware Included 

• Single 10" 175 Watt RMS Amplified Slim Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" KSV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Sealed Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 175 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Wired Remote Gain Control Included
• Mounting Hardware Included

• Single 12" 200 Watt RMS Amplified Slim Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" KSV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Sealed Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 200 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Wired Remote Gain Control Included
• Mounting Hardware Included

• Single 10" 175 Watt RMS Amplified Bass Reflex Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" BASV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Bass Reflex Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 175 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included

• Single 12" 200 Watt RMS Amplified Bass Reflex Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" BASV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Bass Reflex Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 200 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included

• Heavy Duty Single 10" Bass Reflex Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• 2-Tone Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 250 Watts RMS/500 Watts Max

• Heavy Duty Single 12" Bass Reflex Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• 2-Tone Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 275 Watts RMS/550 Watts Max

• Heavy Duty Dual 10" Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• 2-Tone Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 500 Watts RMS/1,000 Watts Max

• Heavy Duty Dual 12" Box Design
• Computer Optimized Acoustic Chamber
• Bass Reflex Aero/Slot Port System
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• 2-Tone Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 550 Watts RMS/1,100 Watts Max

• Heavy Duty Single 10" Thin Truck Enclosure
• Computer Optimized Acoustic Chamber
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• 2-Tone Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 250 Watts RMS/500 Watts Max
• Mounting Hardware Included

• Heavy Duty Single 12" Thin Truck Enclosure
• Computer Optimized Acoustic Chamber
• 2-Layer DDC Coated Black Ribbed Paper Cone
• 2" BASV High Temperature Voice Coil
• Double Pressed Treated Foam Surround
• 2-Tone Aircraft Grade Vinyl Finish
• Single 4-ohm Input
• 300 Watts RMS/600 Watts Max
• Mounting Hardware Included

• Computer Optimized 10" Thin Subwoofer Enclosure
• 275 watt RMS/550 Watts Max
• One Piece Injection Molded Cone
• Single Piece Custom Injected Molded Cone
• Large Roll Rubber Surround
• 2" Vented KSV Voice Coil Former
• Perimeter Aero Voice Coil Venting
• Poly-carbonate/Glass Fiber Composite Turbine Basket
• Chrome Push Terminals
• 2-Tone Vinyl/Carpet Finish
• Down Firing Air Suspension Enclosure
• Heavy-Duty Reinforced Box Design
• Single 4-ohm Input

• 6.5" Co-Axial Weather Proof Speaker System
• Polypropylene Cone
• Rubber Surround
• 14 oz. Motor Structure
• Gold Terminals
• Water Proof Trampoline Voice Coil Gasket
• 1" Mylar Dome Tweeter
• Black Powder Coated Steel Basket
• Stainless Steel Mounting Hardware
• Includes Both White and Black Aluminum Mesh Grills
• 3-ohm System Impedance

• 6 x 9" Co-Axial Weather Proof Speaker System
• Polypropylene Cone
• Rubber Surround
• 30 oz Motor Structure
• Gold Terminals
• Water Proof Trampoline Voice Coil Gasket
• 1" Mylar Dome Tweeter
• Black Powder Coated Steel Basket
• Stainless Steel Mounting Hardware
• Includes Both White and Black Aluminum Mesh Grills
• 3-ohm System Impedance

• 8" Co-Axial Weather Proof Speaker System
• Polypropylene Cone
• Rubber Surround
• 20 oz. Motor Structure
• Gold Terminals
• Water Proof Trampoline Voice Coil Gasket
• 1" Mylar Dome Tweeter
• Black Powder Coated Steel Basket
• Stainless Steel Mounting Hardware
• Includes Both White and Black Aluminum Mesh Grills
• 3-ohm System Impedance 

• 9-Band Active Equalizer
• Bi-Polar Mosfet PWM Power Supply
• Frequency Response: 20HZ-40KHz
• Variable Subwoofer Frequency Roll-off 30Hz-120Hz
• Front Panel Source Selector
• Independent Subwoofer Volume Control
• Front and Rear Output Fader
• 2 Low Level RCA Inputs: Rear Aux and Rear CD
• 3 Low Level RCA Outputs: Sub, Front and Rear
• EQ Centers: 50Hz, 120Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz & 16kHz

• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• 10 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers 
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6 x 9" Upgraded OEM Replacement Component System
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• 20 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers 
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6 x 9" Upgraded OEM Replacement Component System
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• 20 oz. Magnet
• Nylon OEM Speaker Adapter
• 1” Inverted Titanium Dome Tweeter
• Inline Crossovers 
• Factory Plug and Play Wiring Adapters
• 4-ohm System Impedance

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6 x 9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6.5" Upgraded OEM Replacement Component Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6.5" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 10 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6.5" Upgraded OEM Replacement Component Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6x9" Upgraded OEM Replacement Component Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 2.75” High Bandwidth Midrange
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6 1/2" Upgraded OEM Replacement Co-Axial Speakers
• 60 Watts RMS/120 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 20 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 6x9" Upgraded OEM Replacement Co-Axial Speakers
• 80 Watts RMS/160 Watts Max
• Injection Molded PP Cone
• Nylon OEM Speaker Adapter
• 1” Silk Dome Tweeter
• 35 oz. Magnet
• Factory Plug and Play Wiring Adapters 
• 4-ohm System Impedance

• 3" Ring Radiator Horn Tweeter
• Die Cast Horn
• Titanium Diaphragm 
• CNC Aluminum Bullet Phase Plug Diffuser 
• 18 oz. Motor Structure
• Single 4-Ohm 
• 105 dB SPL
• 6 dB Crossover Included
• 4-ohm System Impedance 
• Sold Individually 

• 1" Unique Rare Earth Zirconium Super Tweeter  
• 6dB Crossover Built In
• Surface Mount
• 4-ohm System Impedance

• 1" Silk Dome Tweeter Diaphragm  
• Neodymium Magnet 
• Ferrofluid® Cooling 
• Computer Aided In-line 12 dB Crossover
• Flush/Angle/Surface Mounts Included
• 4-Ohm System Impedance

• 1" Aluminum Dome Tweeter Diaphragm  
• Neodymium Magnet 
• Ferrofluid® Cooling 
• Computer Aided In-line 12 dB Crossover
• Flush/Angle/Surface Mounts Included
• 4-ohm System Impedance

• 8" Stamped Steel Grill
• Corrosion Resistant Black Finish
• Mounting Hardware Included
• Compatible with PowerBass 4XL-80-94, XPRO-8 & XPRO-8CX

• 6.5" Stamped Steel Grill
• Corrosion Resistant Black Finish
• Mounting Hardware Included
• Compatible with PowerBass 4XL-65-92, XPRO-65 & XPRO-65CX

• 8" Pro Audio Mid-range
• Treated/DDC Paper Cone
• Acoustic Dispersion Phase Plug
• Pro Audio Accordion Cloth Surround
• Chrome Push Input Terminals 
• 1.5" KSV Voice Coil
• 4-ohm System Impedance
• Sold Individually 
• Stamped Steel Grill Sold Separately 

• 4" Pro Audio Ring Radiator Horn Tweeter
• Cast Aluminum Horn Housing 
• Titanium Diaphragm 
• Billet Aluminum CNC Cut Phase Plug
• Chrome Push Input Terminals 
• 1.75" KSV Voice Coil
• Double Stack 25 oz. Y-35 Grade Motor Structure 
• 4-ohm Impedance
• Sold Individually 

• 6.5" Pro Audio Mid-range
• Hybrid Carbon/DDC Stiff Paper Cone
• Pro Audio Double Roll Textile Surround
• Chrome Push Input Terminals 
• 1.5" BASV Voice Coil
• 4-ohm Impedance
• 35 oz. Y-35 Grade Motor Structure
• Vented Pole Piece 
• Sold Individually 

• 6.5" Pro Audio Mid-range
• Octagonal easy stacking for more surface area 
• Hybrid Carbon/DDC Stiff Paper Cone
• Pro Audio Double Roll Textile Surround
• Chrome Push Input Terminals 
• 1.5" BASV Voice Coil
• 4-ohm Impedance
• 40 oz. Y-35 Grade Motor Structure
• Vented Pole Piece
• Grills Included 
• Sold Individually 

• 8" Pro Audio Mid-range
• Hybrid Carbon/DDC Stiff Paper Cone
• Pro Audio Double Roll Textile Surround
• Chrome Push Input Terminals 
• 2" BASV Voice Coil
• 40 oz. Y-35 Grade Motor Structure
• Vented Pole Piece 
• 4-ohm System Impedance
• Sold Individually