A202-10CP Dual 10" Sealed Carpeted - Fits 2002 - 2018 Dodge Ram Quad Cab *2019 Legacy

12SV-MOJO - Memphis Audio-12" Single Sealed - 1" MDF All Around- MOJO PRO SUB

BP-12DV - 12" Dual Sealed Slammer 1" Enclosure

A184-10CPV - Dual 10" Carpeted Vented Chevrolet-GMC 2007-2024 Crew Cab

A346-10CPV - Ford 2009-2019 F150 Super Crew (Also Fits 2017 & Up Ford F250/F350 Super Duty)

A362-10CP Dual 10" Sealed Carpeted - Fits 2009 - 2023 Ford F150 Super Crew

BAS8 - 8" 400 Watts RMS Class D Powered Subwoofer in Ported Enclosure, Clip LED, Bass Boost, 180º Phase Shift

BAS6 - 6.5" 250 Watts RMS Powered Subwoofer in Ported Enclosure, Clip LED, Bass Boost, 180º Phase Shift

BG8 - 8" Pre-Loaded 400 Watt RMS 2-Ohm Subwoofer in Ported Enclosure

BG6 - 6.5" Pre-Loaded 250 Watt RMS 2-Ohm Subwoofer in Ported Enclosure

Can-am Maverick X3 Dash Board 6.5" Speaker Panel Empty

• Dash Board Empty Enclosure
• OEM Fit ~ X3 (2017-2023)
• 2 X 6.5" Speaker
• Speaker Wiring Included
• Water Resistant IP65
• Pair (L&R) ~ Black

Can-am Maverick X3 Dash Board 6.5" Speaker Panel With NXL-6/BK

• Dash Panel Loaded Enclosure
• OEM Fit ~ X3 (2017-2023) 
• 2 X 6.5" NXL-6/BK ~ 91dB
• LED RGB Lights
• Pair (R&L) ~ Black
• Water Resistant IP65

GEN-X210LD Bass Package 2 x GEN-X104D 10" Subwoofers In a Ported Box 1600 Watts

• Gen-X Subwoofer Enclosure
• 2 X 10" ~ Gen-X104D
• RMS Power: 800 Watts(1600 Watts Peak)
• Impedance: 2 Ohm ~ 90dB
• 1/2" MDF with Black Carpet
• 35 HZ Ported Box

GEN-X110LD Bass Package GEN-X104D 10" Subwoofer In a Ported Box 400 Watts

• Gen-X Subwoofer Enclosure
• 1 X 10" ~ GEN-X104D
• RMS Power: 400 Watts(800 Watts Peak)
• Impedance: 2 Ohm ~ 90dB
• 1/2" MDF with Black Carpet
• 35 HZ Ported Box

Dual 12" Loaded Subwoofer Ported Rugged Armored Enclosure With ZXI12.4D 2000 Watts Rms

• ZXI Subwoofer Enclosure
• 2 X 12" ZXI12.4D
• RMS Power: 2000 Watts(4000 Watts Peak)
• Impedance: 1 Ohm ~ 93dB
• 3/4" MDF with Black Bed Liner Paint
• 29 HZ Ported Box

12" Loaded Subwoofer Ported Rugged Armored Enclosure With ZXI12.2D 1000 Watts Rms

• ZXI Subwoofer Enclosure
• 1 X 12" ZXI12.2D
• RMS Power: 1000 Watts(2000 Watts Peak)
• Impedance: 1 Ohm ~ 92dB
• 3/4" MDF with Black Bed Liner Paint
• 29 Hz Ported Box

Dual 8" Loaded Amplified High End Aluminium Subwoofer Enclosure 300 Watts Rms

• Subwoofer Enclosure
• 1 X 8" Active  + 1 X 8" Passive
• Amplified with Subwoofer Control Knob
• RMS Power: 300 Watts(1200 Watts Peak)
• Impedance: 2 Ohm 
• 83dB

Dual 8" Loaded High End Aluminium Subwoofer Enclosure 300 Watts Rms

• Subwoofer Enclosure
• 1 X 8" Active & 1 X 8" Passive
• RMS Power: 300 Watts(1200 Watts Peak)
• Impedance: 4 + 4 Ohm
• Black Aluminum Enclosure 
• 83dB

Factory Refurbished

10″ Subwoofer Enclosure with Built-In 300 Watt Amplifier

High Density Abs 2-Way Universal Pod With NXL-8/BK and PRO-TW1L

High Density Abs 2-Way Universal Pod 1 X 8" Loudspeaker and 1 X 3.78” Tweeter

10" Loaded Subwoofer Enclosure for Tundra 2022 and Up Double Cab and Crew Max With subwoofers and Amplifier SPEAKERS INCLUDED

8" Ported Subwoofer Enclosure For FORD F-150 09-22, F-250 15-22 and F-350 15-22-Door

8" Ported Subwoofer Enclosure For FORD F-150 09-22 ,F-250 15-22 and F-350 15-22 4 -Door

8"Ported Subwoofer Enclosure For DODGE 4 Door Crew Cab 19-23

ENS-DODGE19-2X8 DODGE RAM 19-22 Ported Subwoofer Enclosure 2 X 8"

8" Ported Subwoofer Enclosure For CHEVY Silverado and GMC Sierra Crew Cab 4 Door 14-18

8" Ported Subwoofer Enclosure For CHEVY Silverado and GMC Sierra Crew Cab 4 Door 14-18

Bronco Front Doors 6.5" and Tweeter Panels 6th GEN

Revolutionize your Ford Bronco’s driving experience with DS18’s BRO-FD-LR, the ultimate solution for 6th Gen Ford Bronco owners looking for unparalleled sound quality and aesthetic enhancement.

Built to withstand the harshest elements, the BRO-FD-LR is UV protected, ensuring that it resists fading under the sun. Made from lightweight and robust ABS material, these door panels offer both strength and convenience, guaranteeing a long-lasting and reliable audio solution for your vehicle. The high-density plastic molded construction and an injection of sleek black color help these door panels effortlessly blend into the interior of your Ford Bronco, creating a seamless and refined look.

Each of DS18’s BRO-FD-LR Front Door Panels house one DS18 6.5" Midrange or Coaxial speaker and one DS18 Tweeter with Mounting Depths below 2.74”, allowing you to curate your dream sound system with ease.

Installation is a breeze with DS18’s BRO-FD-LR. Simply remove the factory mesh by unscrewing the 5 screws securing it, and with a firm pull, it will be effortlessly detached. Then, utilizing the same anchor points, secure the BRO-FD-LR using the screws removed previously. With an overall depth of 2.74 inches, an overall width of 8.39 inches, and an overall length of 16.48 inches, these door panels offer the perfect fit for your Ford Bronco, optimizing sound performance while seamlessly blending into your vehicle's interior.

Elevate your driving experience on your 4 door with DS18’s BRO-FD-LR and have superior sound everywhere you go.

SPEAKERS NOT INCLUDED

08-23 GMC/CHEVROLET CREW CAB MAXIMUM AIR VINYL BOX, PORTED DOUBLE 12", LED BOX

08-23 GMC/CHEVROLET CREW CAB MAXIMUM AIR VINYL BOX, PORTED DOUBLE 12", STANDARD BOX

08-23 GMC/CHEVROLET CREW CAB MAXIMUM AIR VINYL BOX, SEALED DOUBLE 12", LED BOX

08-23 GMC/CHEVROLET CREW CAB MAXIMUM AIR VINYL BOX, SEALED DOUBLE 12", STANDARD BOX

08-23 GMC/CHEVROLET CREW CAB FACTORY FIT VINYL BOX, SEALED DOUBLE 12", LED BOX

08-23 GMC/CHEVROLET CREW CAB FACTORY FIT VINYL BOX, SEALED DOUBLE 12", STANDARD BOX

30" Marine Water Resistant Amplified With Bluetooth Sound Bar Speaker System RGB LED Lights 8 Speakers 700 Watts

The DS18 HYDRO All Elements Series is comprised of many components and accessories to make any build imaginable come to life. With over 50 marine grade compliant products, we have whatever you need for your ATV, UTV, Side by Side, Boat or anything in between. We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air. This DS18 Sound Bar/Waterproof Speaker System is perfect for audiophiles or the everyday music listener who wants to add a cool, LOUD, clean sounding, and slick set up in their Boat, ATV , UTV. Complete with LED lighting, this sound bar is sure to make a statement anywhere you go!

HYDRO 30" 2-Way Sound Bar Waterproof Speaker System with Bluetooth & Integrated RGB Lighting

Highlights

• Power Handing 80 Watts x 2 RMS
• Peak Music Power 160 Watts x 2 MAX
• IP65 Marine Grade Compliant

Bass Package 2 x SLC-MD10 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 800 Watts

If you are looking for a lot of thumping bass and a very clean prefab box, we here at DS18 have developed a very strong package to fit one of our bestselling subwoofers that we have to offer in a complete box! Now you don have to worry about building a box by yourself to spec for your new subwoofer purchase because you can buy them together with 1 easy click of the mouse.

This beautiful ported box is tuned to 42Hz. The ½ inch thick treated MDF ensures the box will be tough enough to withstand very strong vibrations along with giving very accurate acoustical resonances for the perfect bass response. Inside the box is two of our best-selling subs, the MD12 subwoofer. These subs have a 42 oz ferrite magnet and can take up to 250 watts RMS each and 500w maximum power! With a 4 ohm configuration on the 2 inch 4-layer voice coil, you will have no problem making power out of your amplifier because the final load will be optimal and with a sensitivity of 85.2dB. With this you wont miss out on any of the wide range of frequencies this sub and box combo can produce!

Included in this kit is the amplifier to drive it! The included class AB amp will provide you 350w RMS to perfectly power this package . To install everything you also receive a DS18 installation 4 gauge kit. (AMPKIT4)

Highlights

• Two of our best selling MD12 sub giving you amazing low bass and great wattage handling.
• High Quality prefabricated DS18 subwoofer box that not only looks great but brings out low and loud bass easily.
• Ported design tuned to 42hz.
• Included DS18 Class AB amplifier delivering 350w RMS to give you the perfect to subwoofer matchup.
• Included 4 gauge amplifier kit so you can have all the tools to power up your new DS18 Subwoofer package.

10" Down-Firing Shallow Subwoofer Enclosure 600 Watts

Designed to add magnificent bass to vehicles with minimal amounts of room for larger sized subs and boxes.

The EN-DF10 utilizes a 10 inch subwoofer in a compact enclosure
(sized at 20” x 11” x 6”) to help extend and elaborate the bass for your music!

This subwoofer requires an external amp to feed the 300w RMS 600w Max it needs at 4 ohms. This unit fits behind most conventional car seating, rear cubby, or small sized storage compartments so you can have clear and vibrant bass without sacrificing massive amounts of space.

This enclosure housed subwoofer is sure to bring nothing but good vibes when the beat drops.

Highlights

• Compact design allowing endless options for placement in areas with minimal space.
• Specially designed 10 inch subwoofer that maximizes bass response in spaces that are not typically designed for subwoofers.

Amplified 10" Shallow Down-Firing Subwoofer Enclosure 500 Watts

Designed to add magnificent bass to vehicles with minimal amounts of room for larger sized subs and boxes.

The EN-DF10A utilizes a 10 inch subwoofer in a compact enclosure (sized at 20” x 11” x 6”) to help extend and elaborate the bass for your music!

This subwoofer requires an external amplifier to feed it the 300 watts RMS it needs at 4 ohms.  Equipped with rubber surround and plastic cone these speakers were built to last. The ferrite magnet and copper voice coil on these speakers gives added stability while enclosed for when these speakers are pushed to their limit.

The built in amp provides power at a power rating of 250W RMS and 500W MAX: perfect power settings for long-lasting jam sessions. The included dB boosting, phase adjusting, low pass filtration, and remote bass knob promotes genuine sound clarity by giving complete control over your audio when you need it. This amp also has hi-level inputs so it can be integrated into your factory audio system easily.

This enclosure housed subwoofer is sure to bring nothing but good vibes when the beat drops.

Highlights

• Compact design allowing endless options for placement in areas with minimal space
• Built in high power amplifier with remote control functionality.
• 250W RMS 500W MAX output engineered to power this compact subwoofer and enclosure to optimal production.
• Specially designed 10 inch subwoofer that maximizes bass response in spaces that are not typically designed for subwoofers.
• Small sealed box made of 5/9 MDF and covered in stylish black carpet
• .42 CF net internal volume

EMPTY 6X9 SPEAKER BOX (PAIR)

12" Single Shallow Sealed Downfire

TRUCK CAB GUIDE

Atrend 12AME 12” Single Sealed / Shallow Mount / Down Fire Subwoofer Enclosure

• Pro Tuned 12” Single sealed, down fire, shallow mount subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers.
• ¾.” High-Grade MDF Front Baffle for Ultimate structural rigidity and no-flex construction.
• 0.47 Cubic Feet Net Volume internal air space is ideal for tight accurate bass reproduction.
• CNC Miter & Dado design and construction for the ultimate in an airtight precision fit of all parts which ensures a rattle and noise-free environment.
• Recessed Side Panels increase structural integrity, eliminates unwanted flex and vibration.
• Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
• Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
• Premium OEM Grade Carpeting for factory look and durability.
• Enclosure Dimensions Sub Cut Out: 11.125”, Mounting Depth: 4.5”, Height: 14”, Width: 19.75”, Depth: 7”

10" Single Shallow Sealed Downfire

TRUCK CAB GUIDE

Atrend 10AME 10” Single Sealed / Shallow Mount / Down Fire Subwoofer Enclosure

• Pro Tuned 10” Single sealed, down fire, shallow mount subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers.
• ¾.” High-Grade MDF Front Baffle for Ultimate structural rigidity and no-flex construction.
• 0.47 Cubic Feet Net Volume internal air space is ideal for tight accurate bass reproduction.
• CNC Miter & Dado design and construction for the ultimate in an airtight precision fit of all parts which ensures a rattle and noise-free environment.
• Recessed Side Panels increase structural integrity, eliminates unwanted flex and vibration.
• Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
• Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
• Premium OEM Grade Carpeting for factory look and durability.
• Enclosure Dimensions Sub cut out: 9.125”, mounting depth: 4.125”, Height: 12”, Width: 19.75”, Depth: 6”

15" Dual Vented Black Carbon Fiber

• 15" Dual Chambered Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Embroidery finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Box volume: 3.00 cubic feet (per chamber)
• Total box volume: 6.00 cubic feet
• Dimensions: 19"D x 39"W x 18"H

Why Choose Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

15" Single Vented Black Carbon Fiber

• 15" Single Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Total box volume: 4.75 cubic feet
• Dimensions: 19-1/2"D x 29"W x 18"H

Why Choose GFX/Carbon Series Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

10" Dual Vented Black Carbon Fiber

• 10" Dual Chambered Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Embroidery finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Box volume: 1.50 cubic feet (per chamber)
• Total box volume: 3.00 cubic feet
• Dimensions: 17"D x 30"W x 14"H

Why Choose Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

10" Single Vented Black Carbon Fiber

• 10" Single Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Total box volume: 1.75 cubic feet
• Dimensions: 14"D x 16"W x 18-1/4"H

Why Choose GFX/Carbon Series Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

12" Dual Vented Black Carbon Fiber

• 12" Dual Chambered Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Embroidery finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Box volume: 2.25 cubic feet (per chamber)
• Total box volume: 4.50 cubic feet
• Dimensions: 18"D x 34"W x 16"H

Why Choose Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

12" Single Vented Black Carbon Fiber

• 12" Single Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Total box volume: 2.40 cubic feet
• Dimensions: 18-1/4"D x 18-1/4"W x 16-1/4"H

Why Choose GFX/Carbon Series Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

Bass Package 2 x ZR12D4 12" Subwoofers In a Ported Box 3200 Watts

The ZR212LD provides dual 12 inch subwoofers loaded into a ported box for the listeners who like it loud!

The ported box is tuned to 29 Hz and helps get the most from your subwoofers by delivering a deeper, punchier bass. Included in the ported box are two ZR12.4D subwoofers, one of our bestselling car audio subs, designed with dual 4-Ohms voice coils wired in parallel for a nominal impedance of 1-Ohm.

This loaded subwoofer combo offers great sound through high-quality and high-power subwoofers in a prefabricated box that is guaranteed to last! The RMS requirement is 1500W RMS and 3000W max: so in order to power this combo to maximum potential, we recommend a 2000W RMS Amplifier like the ZR2000.1D, H-KO2, or EXL-P2000X1D.

Highlights :

• The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass
• Dual 12 inch subwoofers with the cone area to blast great sounding bass more efficiently Subwoofers

Key Features:

ZR12.4D:

•  Two 12 inch DVC subwoofer
•  Max Power Handling: 1500 watts each
•  RMS Power Handling: 750 watts each
•  Frequency Response: 25hz-200hz
•  Voice Coil Diameter: 2.5"
•  Voice Coil Material: Copper
•  Impedance: Dual Voice Coil 4-Ohm
•  Sensitivity: 82 DB
•  Magnet Weight: 100 Oz
•  Magnet Material: Ferrite
•  Mounting Depth: 6.6"
•  Xmax: 25mm one way

Box:

• Box Material: 3/4 inch MDF
•  Box Covering: Carpet with DS18 logo
•  Box Tuning: 29hz
•  Box Type: Side Ported
•  Internal Volume: 5.3 ft3Demensions:
•  Height: 14.48"
•  Width: 36.22"
•  Depth 1: 19.68"
•  Depth 2: 21.65"

Car Audio Bass Package 1 x ZR12D2 12" Subwoofers In a Ported Box 1600 Watts

This is a prefabricated box that comes with one of our best selling subwoofers, the ZR12.2D. Included is a beautiful carpeted box with DS18 designs tuned to 29 HZ.

The box is constructed of thick 3/4 MDF for great sound and acoustical resonance. The subwoofer included is the very popular ZR12.2D that is a dual voice coil 2 ohm subwoofer wired in parallel for a final nominal impedance of 1 ohm that will require 800w RMS and 1600 W MAX.

This loaded box is a great solution to get hard hitting heavy bass for all to enjoy. To power this combo, we recommend a 1000w RMS amplifier like the ZR1000.1D to power this setup to its maximum potential.

Highlights 
 

• The box is constructed of thick 3/4 inch MDF for great strength, resonance, and tuned to 29hz for low and hard hitting bass.
• One ZR12.2D 12 inch subwoofer that will give you the cone area to push out great sounding bass without a lot of power requirements.

Key Features :

• 12 inch DVC subwoofer
• Max Power Handling: 1600 watts
• RMS Power Handling: 800 watts
• Frequency Response: 25hz-200hz
• Voice Coil Diameter: 2.5"
• Voice Coil Material: Copper
• Impedance: Dual Voice Coil 2-Ohm
• Sensitivity: 82 DB
• Magnet Weight: 100 OZ
• Magnet Material: Ferrite
• Mounting Depth: 6.6"
• X max: 25mm one way

Box:

• Box Material: 3/4 inch MDF
• Box Covering: Carpet
• Box Tuning: 29hz
• Box Type: Ported
• Internal Volume: 2.8 ft3

Dimensions:

• Height: 14.48"
• Width: 23.14"
• Depth 1: 17.71"
• Depth 2: 19.68"