30" Marine Water Resistant Amplified With Bluetooth Sound Bar Speaker System RGB LED Lights 8 Speakers 700 Watts

The DS18 HYDRO All Elements Series is comprised of many components and accessories to make any build imaginable come to life. With over 50 marine grade compliant products, we have whatever you need for your ATV, UTV, Side by Side, Boat or anything in between. We invite you to get as creative as possible and make the loudest, clearest system on any terrain, water body, or air. This DS18 Sound Bar/Waterproof Speaker System is perfect for audiophiles or the everyday music listener who wants to add a cool, LOUD, clean sounding, and slick set up in their Boat, ATV , UTV. Complete with LED lighting, this sound bar is sure to make a statement anywhere you go!

HYDRO 30" 2-Way Sound Bar Waterproof Speaker System with Bluetooth & Integrated RGB Lighting

Highlights

• Power Handing 80 Watts x 2 RMS
• Peak Music Power 160 Watts x 2 MAX
• IP65 Marine Grade Compliant

Bass Package 2 x SLC-MD10 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 800 Watts

If you are looking for a lot of thumping bass and a very clean prefab box, we here at DS18 have developed a very strong package to fit one of our bestselling subwoofers that we have to offer in a complete box! Now you don have to worry about building a box by yourself to spec for your new subwoofer purchase because you can buy them together with 1 easy click of the mouse.

This beautiful ported box is tuned to 42Hz. The ½ inch thick treated MDF ensures the box will be tough enough to withstand very strong vibrations along with giving very accurate acoustical resonances for the perfect bass response. Inside the box is two of our best-selling subs, the MD12 subwoofer. These subs have a 42 oz ferrite magnet and can take up to 250 watts RMS each and 500w maximum power! With a 4 ohm configuration on the 2 inch 4-layer voice coil, you will have no problem making power out of your amplifier because the final load will be optimal and with a sensitivity of 85.2dB. With this you wont miss out on any of the wide range of frequencies this sub and box combo can produce!

Included in this kit is the amplifier to drive it! The included class AB amp will provide you 350w RMS to perfectly power this package . To install everything you also receive a DS18 installation 4 gauge kit. (AMPKIT4)

Highlights

• Two of our best selling MD12 sub giving you amazing low bass and great wattage handling.
• High Quality prefabricated DS18 subwoofer box that not only looks great but brings out low and loud bass easily.
• Ported design tuned to 42hz.
• Included DS18 Class AB amplifier delivering 350w RMS to give you the perfect to subwoofer matchup.
• Included 4 gauge amplifier kit so you can have all the tools to power up your new DS18 Subwoofer package.

Amplified 10" Shallow Down-Firing Subwoofer Enclosure 500 Watts

Designed to add magnificent bass to vehicles with minimal amounts of room for larger sized subs and boxes.

The EN-DF10A utilizes a 10 inch subwoofer in a compact enclosure (sized at 20” x 11” x 6”) to help extend and elaborate the bass for your music!

This subwoofer requires an external amplifier to feed it the 300 watts RMS it needs at 4 ohms.  Equipped with rubber surround and plastic cone these speakers were built to last. The ferrite magnet and copper voice coil on these speakers gives added stability while enclosed for when these speakers are pushed to their limit.

The built in amp provides power at a power rating of 250W RMS and 500W MAX: perfect power settings for long-lasting jam sessions. The included dB boosting, phase adjusting, low pass filtration, and remote bass knob promotes genuine sound clarity by giving complete control over your audio when you need it. This amp also has hi-level inputs so it can be integrated into your factory audio system easily.

This enclosure housed subwoofer is sure to bring nothing but good vibes when the beat drops.

Highlights

• Compact design allowing endless options for placement in areas with minimal space
• Built in high power amplifier with remote control functionality.
• 250W RMS 500W MAX output engineered to power this compact subwoofer and enclosure to optimal production.
• Specially designed 10 inch subwoofer that maximizes bass response in spaces that are not typically designed for subwoofers.
• Small sealed box made of 5/9 MDF and covered in stylish black carpet
• .42 CF net internal volume

12" Amplified Powered Car Subwoofer Shallow Enclosure 700 Watts

10" Amplified Powered Car Subwoofer Shallow Enclosure 700 Watts

• Single 8" 150 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum  Enclosure with Dynamic Damping
• 8” Injection Molded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 150 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 9.75"W x 2.75"H x 13.5"D

• Single 10" 200 Watt RMS Amplified Under Seat Subwoofer Enclosure
• Extruded Aluminum  Enclosure with Dynamic Damping
• 10” Injection Molded PP Cone Woofer
• 1.5" KSV Voice Coil Former
• 1-Channel 200 Watt High Efficiency Class D Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included
• 10.9"W x 3.2"H x 14.4"D

• Single 10" 175 Watt RMS Amplified Downfiring Enclosure
• Computer Optimized 10" Thin Subwoofer Enclosure
• Custom Injected Molded Cone
• Large Roll Rubber Surround
• 2" Vented KSV Voice Coil Former
• Perimeter Aero Voice Coil Venting
• Poly-carbonate/Glass Fiber Composite Turbine Basket
• Chrome Push Terminals
• 2-Tone Vinyl/Carpet Finish
• 1-Channel 275 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level RCA input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz - 200Hz
• Variable 12db Bass Boost EQ @ 45Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Wired Remote Gain Control Included
• Down Firing Air Suspension Enclosure
• Heavy-Duty Reinforced Box Design
• Mounting Hardware Included 

• Single 10" 175 Watt RMS Amplified Slim Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" KSV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Sealed Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 175 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Wired Remote Gain Control Included
• Mounting Hardware Included

• Single 12" 200 Watt RMS Amplified Slim Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" KSV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Sealed Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 200 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Wired Remote Gain Control Included
• Mounting Hardware Included

• Single 10" 175 Watt RMS Amplified Bass Reflex Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" BASV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Bass Reflex Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 175 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included

• Single 12" 200 Watt RMS Amplified Bass Reflex Subwoofer Enclosure
• Injection Molded PP Cone Woofer
• 2" BASV Voice Coil Former
• Large Roll Butyl Rubber Surround
• Computer Optimized Bass Reflex Enclosure
• Durable Aircraft Grade Vinyl Finish
• 1-Channel 200 Watt High Efficiency Class A/B Design
• High Level (Speaker)/Low Level (RCA) Input
• Soft Delay Turn On/Off Circuit
• Auto Turn-on (high level input only)
• Variable Low Pass Electronic Crossover 50Hz – 200Hz
• Variable 12dB Bass Boost EQ @ 45 Hz
• Variable Gain Control
• Protection Circuit: Impedance Over-load, Speaker Short, Circuit, Thermal Overheating, and DC Output
• Variable Wired Remote Gain Control Included
• Mounting Hardware Included