1" Neodymium Driver And Horn Kit 160 Watts 1.5" Polyimide 8-Ohm Vc

• 1" Compression Driver with Horn
• RMS Power: 160 Watts(320 Watts Peak)
• Impedance: 8 Ohm 
• Neodymium Magnet
• Composite Polymide Diaphragm
• 111dB

15% Duty Cycle Sealed Air Compressor

• 12-volt permanent magnetic motor
• Duty Cycle: 15%
• Working Pressure: 130 PSI
• Amp Draw: 16 amps
• Rated for use with up to a 1 gallon tank
• Flow Rate: 1.34 CFM @ 0 PSI
• Dimensions: 7”L x 3.25”W x 5.75”H
• Shipping Weight: 5 lbs
• Replacement 130 PSI sealed compressor for 6270 air system, ProBlaster™ kits HK3, HK3-1, HK-4 and HK4-1

Air Tank

• 5.0 Gallon
• Six 1/4″ NPT Ports
• One 1/2″ NPT Port
• Replacement air tank for 6450 air system and HK9

Air Tank

• 3.0 Gallon
• Five 1/4″ NPT Ports
• One 1/2″ NPT Ports
• Replacement air tank for 6350 air system and RAMHD kits

Air Tank

• 3.0 Gallon
• Five 1/4″ NPT Ports
• One 3/8″ NPT Port
• Replacement air tank for VELO-230, VELO-734, VELO-OBA6450,SDKIT-230, SDKIT17-734, SD17OBA-6450, and the ProBlaster™ HK9-SLIMLINE kit

Air Tank

• 3.0 Gallon
• Six 1/4″ NPT Ports
• One 1/2″ NPT Port
• Replacement air tank for 6350 air system, ProBlaster™ kits, HK7, and HK8

Air Tank

• 1.5 Gallon
• Five 1/4″ NPT Ports
• Replacement air tank for 6275 air system, VELO-220, ProBlaster™ kits HK5, HK6 and HK-EURO

Air Tank

• 1.0 Gallon
• Five 1/4″ NPT Ports
• Replacement air tank for 6270 air system, GMTRK-2, ProBlaster™ kits HK3, HK3-1, HK4 and HK4-1

Air Tank

• 0.5 Gallon
• Five 1/4″ NPT Ports
• Replacement air tank for 6260 air system, ProBlaster™ kits HK1, HK2 and HK2-1

Air Tank

• 0.66 Gallon
• Four 1/8" NPT Ports
• Replacement air tank for JEEPKIT-1

M4/TA3 12V

Electropneumatic traffic horn with a small sized compressor and three horns with an immediate and powerful sound. The aftermarket kit, available in blister FIAMM brand, includes everything needed for installation. M4/TA3 is produced for cars, motorcycles and trucks at 12V.

2 TRUMPET RIVIERA HORNS

The Riviera delivers the popular European sound through a powerful 12 volt, maintenance free compressor and 2 trumpet horns. It is excellent for trucks, vans, cars, RV’s motorcycles and SUV’s. Installation kit includes 12 volt maintenance free compressor, relay, tubing, and mounting hardware. 

135 dB @ 4"

ULTIMATE BLAST

This compact design allows the unit to be installed into tight area where larger horns could not fit. Our specially designed maintenance free compressor is attached to the horn for
“one location” mounting. Each units comes with relay and mounting screws for easy installation.

12V, 135 dB @ 4"

Back up Alarm

High quality alarm meeting SAE specs. Suitable for installation on trailers, trucks, forklifts, delivery vans, buses and recreational vehicles. Steam cleanable, polarity protection, compact size and easy to install.

12-24V, SAE Type C Alarm, 97 dB @ 4".

THE BIG BOSS

Get the deeper sound you want with this durable 2 trumpet horn. Powered by a 12 volt maintenance free compressor, this horn truly is the boss of the road! Installation kit includes 12 volt maintenance free compressor, relay, tubing, and mounting hardware.

Miscellaneous Fitting

Drain Cock – 1/4″ M NPT

52250 Safety Valve

Safety valve – 1/4″ M NPT – 250 PSI pop-off+

52175 Safety Valve

Safety valve – 1/4″ M NPT – 175 PSI pop-off

52155 Safety Valve

Safety valve rated to 155 PSI, 1/4″ NPT Male fitting

52145 Safety Valve

Safety valve – 1/4″ M NPT – 145 PSI pop-off

Compression Fitting; Brass; 1/4 in. M NPT Elbow; For 1/4 in. OD Tube

FEATURES:

• Brass And Nylon Construction
• NPT Fitting

Tank mount pressure switch 1/4″ M NPT

Heavy duty tank-mount pressure switch regulates the air pressure in your air tank. The pressure switch gets wired to the compressor and turns the air compressor on and off automatically.

• 170 PSI on, 200 PSI off

Sealed tank mount pressure switch with 12-gauge lead wires, ¼” M NPT port

Heavy duty tank-mount pressure switch regulates the air pressure in your air tank. The pressure switch gets wired to the compressor and turns the air compressor on and off automatically.

• 100 PSI on, 130 PSI off

Sealed tank mount pressure switch with 12 gauge wire leads, 1/4″ M NPT

Heavy duty tank-mount pressure switch regulates the air pressure in your air tank. The pressure switch gets wired to the compressor and turns the air compressor on and off automatically.

• 90 PSI on, 120 PSI off

Vortex™ 4 Series 12-volt chrome solenoid valve

• Standard air horn solenoid
• 1/4″ tube in, 1/4″ M NPT out
• 175 PSI max input

Model 6275RC 50% Duty Cycle Air Compressor

Model 6275RC Fully Submersible Waterproof 150 PSI  Medium Duty Air Compressor

Kleinn Automotive has released the first fully submersible 12 volt automotive air compressors on the market. Designed specifically for the off road enthusiast, this medium duty air compressor is capable of running fully submerged under water. Regardless of the terrain or river crossings, this air compressor is ready to take on the elements. The Kleinn engineering team developed the new 6275RC air compressor with modified seals & gaskets to make it completely waterproof. The 50% duty-cycle compressor is rated at 150 PSI and includes a snorkel air intake system with filter to locate the air intake up and away from dirt, water and debris insuring years of trouble free service.

Replacement compressor for the 6275, HK5, HK6, HK-Euro and GMTRK-2 kits.

• 12-Volt Permanent Magnetic Motor
• 50% Duty Cycle @ 100 PSI
• 150 Max PSI
• 18 Amp Max Draw
• Rated for use with up to 2.5 gallon tank
• Dimensions: 8.25”L x 4”W x 6.25”H
• Flow Rate: 1.70 CFM @ 0 PSI
• Shipping Weight: 8 lbs

Model 6260RC 10% Duty Cycle Air Compressor

Replacement 120 PSI sealed compressor for 6260 air system, JeepKit-1, JeepKit-99, ProBlaster™ kits HK1, HK2 and HK2-1

The Demon™ – Black XCR 2.0™ spun steel train horn with flat rack mount, detachable trumpets & 3/8″ solenoid valve

The Demon™ Model 730 features flat rack detachable design, spun steel trumpets (18.25”, 14.75”, 10.5”) & extreme flow, heavy duty brass solenoid valve. This is the loudest, largest and most aggressive train horn on the market, bar none. XCR 2.0™-coated black coating ensures that they’ll withstand heat, sun, UV & salt spray. Fully upgradeable with our Ultra BlastMaster™ P/N 6890 for a truly earth-shaking experience.

Features:

• XCR 2.0 coated black removable trumpets
• Vortex VX6003 12 volt heavy duty brass body solenoid included
• Detachable trumpets
• Our Loudest Horn!
• 157.8 decibel output

Chrome Plated Spun Copper Triple Train Horns with Flat Rack Mount

If you’re looking for the loudest, nastiest horn there is, look no further. The Kleinn Model 630 is the ultimate train horn for your car, truck or SUV. The trumpets mount separately for easy installation and the 630 can be upgraded with the BlastMaster Upgrade Kit to make it go even LOUDER!

Features:

• Three trumpets, 17.5″, 15.5″ and 11.5″
• Deep, loud train horn sound
• Detachable chrome plated copper trumpets
• Vortex 4 12v electronic train horn solenoid included
• 154.4* db output

Chrome plated spun copper triple train horn with 1/2″ heavy duty Vortex 6™ solenoid valve upgrade

There’s no mistaking that genuine train horn sound. Loud and deep, Kleinn 500 Series train horns will turn heads and move people — big time! All 500 Series horns have reversible trumpets so you can get that realistic multi-directional effect, just like a real locomotive. Sturdy aluminum mounting brackets allow for under-body or rooftop mounting. When these horns sound you’ll swear that you’re standing on the tracks!

• Three tuned trumpets, 16″, 14″, and 11″
• Chrome-plated copper trumpets
• Includes upgraded VX6003 solenoid valve with wider orifice and 1/2″ tubing for increased volume!

Chrome plated spun copper triple train horn with triangular mount and Vortex™ 4 solenoid valve

There’s no mistaking that genuine train horn sound. Loud and deep, Kleinn 500 Series train horns will turn heads and move people — big time! All 500 Series horns have reversible trumpets so you can get that realistic multi-directional effect, just like a real locomotive. Sturdy aluminum mounting brackets allow for under-body or rooftop mounting. When these horns sound you’ll swear that you’re standing on the tracks!

• Three tuned trumpets, 16″, 14″ and 11″
• Chrome-plated spun copper
• Output (db): 152.2

Chrome Plated ABS triple Train Horn with Triangular Mount and Vortex™ 4 Solenoid Valve

There’s no mistaking that genuine train horn sound. Loud and deep, Kleinn 500 Series train horns will turn heads and move people — big time! All 500 Series horns have reversible trumpets so you can get that realistic multi-directional effect, just like a real locomotive. Sturdy aluminum mounting brackets allow for under-body or rooftop mounting. When these horns sound you’ll swear that you’re standing on the tracks!

• Three tuned trumpets, 16″, 14″, and 11″
• Chrome-plated high impact ABS
• Output (db): 151.7

25″ Single chrome zinc alloy roof mount horn, square trumpet end with horn cover

25-inch chrome-plated, zinc allow single roof mount horn features square trumpet design with integrated end covers for severe road conditions. Front support and fittings for through-the roof installation are included. A solenoid or manual valve is required for installation but is not included.

• Single 25″ Trumpet
• Perfect for manual or hand pull valves
• Roof mount design eliminates exposed tube and wiring
• Chrome plated spun copper trumpets
• Manual valve and fitting packs sold separately
• 152.1 db output

25″ Chrome plated roof mount horn

Get the sound of a Big-Rig on your truck with these roof-mount horns. These are the same kind of horns you’ll find on a Mack or a Peterbilt. The air inlets are on the underside to allow operation with manual valves and to avoid exposed air lines and wiring.  (manual valve or solenoid valve not included, requires P/N 330 for installation)

• Single 25″ Trumpet
• Perfect for manual or hand pull valves
• Roof mount design eliminates exposed tube and wiring
• Chrome plated spun copper trumpets
• Manual valve and fitting packs sold separately
• 152.1 db output

Chrome Plated Dual Roof Mount  Horn

Get the sound of a Big-Rig on your truck with these roof-mount horns. These are the same kind of horns you’ll find on a Mack or a Peterbilt. The air inlets are on the underside to allow operation with manual valves and to avoid exposed air lines and wiring.

• Perfect for manual or hand pull valves
• Roof mount design eliminates exposed tube and wiring
• Chrome plated spun copper trumpets
• Manual valve and fitting packs sold separately
• 152.1 db output

The Beast ™ 230 Triple Train Horns

For everyone who told us they wanted a louder, nastier train horn – here it is. The flat-rack design requires 40% less clearance than our 500 Series train horns. The trumpets can be separated from the mounting brackets for installation in vehicles that could not otherwise fit full-size train horns.

Now includes a Vortex 6 all-brass high flow solenoid air valve. Want it LOUDER? Add the Kleinn P/N 6885 Ultra Blastmaster air valve upgrade kit.  The kit includes two additional Vortex 6 air valves, 1/2′ airline and air fittings.

NOTE: in 2017 Kleinn upgraded Model 230 horns to the all brass Vortex 6 air valves.  If your Model 230 horn has the chrome Model 307 air valve you will need the Model 6880 Blastmaster Valve Upgrade Kit.

• Three trumpets, 17.5″, 15.5″ and 11.5″
• Deep, loud train horn sound
• Detachable black ABS trumpets
• Vortex 6 12v electronic all brass high flow train horn solenoid included
• 153.3* db output

Dual black ABS horn – alternating Euro tone horn with dual Vortex™ 4 solenoid valves

For those looking for a horn sound that’s unlike anything you’ve heard here in the States, Model 225 provides an alternating dual tone that is sure to turn heads and remind others of a classic European Sound. Made from high impact ABS with trumpet sizes of 15″ & 9.75″. Features dual solenoids and a switching relay that makes the horn tone oscillate.

• Two trumpets, 15″ and 9 3/4″
• Oscillating tone
• Black High Impact ABS
• 2x Vortex 4 12v electronic air horn solenoids included
• 152.8 db output

Dual black ABS separately mounted train horns with dual Vortex™ 4 solenoid valves

These train horns are designed for durability, easy fit and extreme sound. The ABS trumpets with extra-wide bells produce a bone-rattling locomotive horn blast that can be felt as well as heard. The 220’s feature two separate mounting air horns each with their own solenoids.

• Two separate mounting air horns
• Easy mounting w/ intense train horn sound
• Black high impact ABS train horn trumpets
• (2) Vortex 4 12v electronic air horn solenoids included
• 154.2 db output

Compact black XCR 2.0™ coated zinc alloy quad train horn with Vortex™ 4 solenoid valve

Want a train horn on your car but don’t have the space? Our model 141 quad air horn delivers devastating sound with compact, easy to install construction. This air horn can fit in almost any vehicle and deliver the big time loud air horn sound you need. Easy to fit and extreme sound; these loud air horns are the complete package.

• Four trumpets, 13″, 11″, 8 1/2″ and 7″
• Loud, full, clean sound
• Black XCR2.0 Stealth finish
• Vortex 4 12v electronic air horn solenoid included
• 150.3 db output

Compact chrome plated zinc alloy quad train horn with Vortex™ 4 solenoid valve

Want a train horn on your car but don’t have the space? Our model 141 quad air horn delivers devastating sound with compact, easy to install construction. This air horn can fit in almost any vehicle and deliver the big time loud air horn sound you need. Easy to fit and extreme sound; these loud air horns are the complete package.

• Four trumpets, 13″, 11″, 8 1/2″ and 7″
• Loud, full, clean sound
• Chrome finish
• Vortex 4 12v electronic air horn solenoid included
• 150.3 db output

Compact black XCR 2.0™ coated zinc alloy triple train horn with Vortex™ 4 solenoid valve

Want a train horn on your car but don’t have the space? Our model 130 triple air horn delivers devastating sound with compact, easy to install construction. This air horn can fit in almost any vehicle and deliver the big time loud air horn sound you need. Easy to fit and extreme sound; these loud air horns are the complete package

• Three trumpets, 14 1/4″, 11 1/2″ and 9 1/4″
• Loud, sharp, blended sound
• Black XCR2.0 Stealth finish
• Vortex 4 12v electronic air horn solenoid included
• 152.9 db output

Compact chrome plated zinc alloy triple train horn with Vortex™ 4 solenoid valve

Want a train horn on your car but don’t have the space? Our model 130 triple air horn delivers devastating sound with compact, easy to install construction. This air horn can fit in almost any vehicle and deliver the big time loud air horn sound you need. Easy to fit and extreme sound; these loud air horns are the complete package

• Three trumpets, 14 1/4″, 11 1/2″ and 9 1/4″
• Loud, sharp, blended sound
• Chrome finish
• Vortex 4 12v electronic air horn solenoid included
• 152.9 db output

Compact black XCR 2.0™ coated spun copper dual truck horn with Vortex™ 4 solenoid valve

Dual truck horn, two all metal trumpets 16.75″ and 14.5″ in length. Think fire truck or ambulance air horn but LOUDER! Our compact air horns can fit in almost any vehicle and deliver the big sound you need. Easy to fit, and extreme truck horn sound.

• Dual air horns, 16 3/4″ and 14 1/2″
• Long trumpets for deeper truck horn sound
• Black XCR2.0 Stealth finish
• Vortex 4 12v electronic air horn solenoid included
• 153.5 db output

Compact chrome plated copper dual truck horn with Vortex™ 4 solenoid valve

Dual truck horn, two all metal trumpets 16.75″ and 14.5″ in length. Think fire truck or ambulance air horn but LOUDER! Our compact air horns can fit in almost any vehicle and deliver the big sound you need. Easy to fit, and extreme truck horn sound.

• Dual air horns, 16 3/4″ and 14 1/2″
• Long trumpets for deeper truck horn sound
• Chrome finish
• Vortex 4 12v electronic air horn solenoid included
• 153.5 db output

Compact black XCR2.0™ dual zinc alloy air horn with Vortex™ 4 solenoid valve

Dual truck horn, two black XCR2.0 trumpets 7.5″ and 10″ in length. This is the same horn we feature in our Jeep Trailblaster™ kits. It’s been so popular we’ve decided to offer it as a standalone. Our compact air horns can fit in almost any vehicle and deliver the big sound you need. Easy to fit, and extreme truck horn sound.

• Dual air horns, 7 1/2″ and 10″
• Black XCR2.0 Stealth finish
• Vortex 4 12v electronic air horn solenoid included
• 151.4 db output

Compact chrome plated zinc alloy dual air horn with Vortex™ 4 solenoid valve

Need a loud air horn on your vehicle but you’re working with a tight space? The Kleinn 99 dual air horn has been installed on everything from sports cars to motorcycles to golf carts. Don’t let the size of this air horn fool you, the Kleinn 99 produces a loud air horn blast that makes you ears ring.

• Dual air horn trumpets, 8 1/2″ and 6 1/2″
• High pitch, painful sound
• Chrome plated zinc alloy air horn trumpets
• Vortex 4 12v electronic air horn solenoid included
• 153.6 db output

Super heavy duty onboard air system

Our highest capacity, highest output air system. Includes a 150 PSI, 100% duty high output waterproof air compressor and a 5 gallon tank that can power your air horns as well as other accessories like air bags and small air tools. Also includes a quick-connect tire inflation kit with storage case.

Package Includes:

• 150 PSI waterproof air compressor
• U.S. Made, 5.0 gallon air tank
• 110/145 PSI pressure switch
• 175 PSI safety valve
• 1/4″ NPT drain cock
• 1/4″ NPT compression fitting
• Tire inflator w/ carrying case
• Remote mount intake filter
• Mounting hardware

24-volt heavy duty onboard air system

Heavy-duty 24-volt onboard air system. Includes a 24-volt 150 PSI, 100% duty compressor and a 3.0 gallon tank that can power your air horns as well as other accessories like air bags and small air tools. Also includes a quick-connect tire inflation kit with tire chuck and storage case.

Package Includes:

• 24-volt, 150 PSI sealed compressor
• U.S. Made, 3.0 gallon air tank
• 110/145 PSI pressure switch
• 175 PSI safety valve
• 1/4″ NPT drain cock
• 1/4″ NPT compression fitting
• Tire inflator w/ carrying case
• Remote mount intake filter
• Mounting hardware

Complete heavy duty onboard air system

Our best onboard air system. Includes a 150 PSI, 100% duty compressor and a 3.0 gallon tank that can power your air horns as well as other accessories like air bags and small air tools. Also includes a quick-connect tire inflation kit with a 30′ coil hose, tire chuck and storage case.

Package Includes:

• 150 PSI compressor
• U.S. Made, 3.0 gallon air tank
• 110/145 PSI pressure switch
• 175 PSI safety valve
• 1/4″ NPT drain cock
• 1/4″ NPT compression fitting
• 35′ tire inflator coil hose w/ carrying case
• Remote mount intake filter
• Mounting brackets & hardware

Complete High Flow Onboard Air System

A lot of power from a small space. The 6275 delivers the 150 PSI pressure you need to get maximum output from your horns with only a minimum of space. Perfect for frame rail mounting in almost any car! The compressor is sealed and moisture/dust resistant and inlcudes a remote intake filter and a check valve to prolong the life of the compressor.

Package Includes:

• 150 PSI compressor
• U.S. Made, 1.5 gallon air tank
• 120/150 PSI pressure switch
• 175 PSI safety valve
• 1/4″ NPT drain cock
• 1/4″ NPT compression fitting
• Remote mount intake filter
• Mounting brackets & hardware