BAS8 - 8" 400 Watts RMS Class D Powered Subwoofer in Ported Enclosure, Clip LED, Bass Boost, 180º Phase Shift

BAS6 - 6.5" 250 Watts RMS Powered Subwoofer in Ported Enclosure, Clip LED, Bass Boost, 180º Phase Shift

BG8 - 8" Pre-Loaded 400 Watt RMS 2-Ohm Subwoofer in Ported Enclosure

BG6 - 6.5" Pre-Loaded 250 Watt RMS 2-Ohm Subwoofer in Ported Enclosure

Can-am Maverick X3 Dash Board 6.5" Speaker Panel With NXL-6/BK

• Dash Panel Loaded Enclosure
• OEM Fit ~ X3 (2017-2023) 
• 2 X 6.5" NXL-6/BK ~ 91dB
• LED RGB Lights
• Pair (R&L) ~ Black
• Water Resistant IP65

GEN-X110LD Bass Package GEN-X104D 10" Subwoofer In a Ported Box 400 Watts

• Gen-X Subwoofer Enclosure
• 1 X 10" ~ GEN-X104D
• RMS Power: 400 Watts(800 Watts Peak)
• Impedance: 2 Ohm ~ 90dB
• 1/2" MDF with Black Carpet
• 35 HZ Ported Box

12" Loaded Subwoofer Ported Rugged Armored Enclosure With ZXI12.2D 1000 Watts Rms

• ZXI Subwoofer Enclosure
• 1 X 12" ZXI12.2D
• RMS Power: 1000 Watts(2000 Watts Peak)
• Impedance: 1 Ohm ~ 92dB
• 3/4" MDF with Black Bed Liner Paint
• 29 Hz Ported Box

Dual 8" Loaded Amplified High End Aluminium Subwoofer Enclosure 300 Watts Rms

• Subwoofer Enclosure
• 1 X 8" Active  + 1 X 8" Passive
• Amplified with Subwoofer Control Knob
• RMS Power: 300 Watts(1200 Watts Peak)
• Impedance: 2 Ohm 
• 83dB

Dual 8" Loaded High End Aluminium Subwoofer Enclosure 300 Watts Rms

• Subwoofer Enclosure
• 1 X 8" Active & 1 X 8" Passive
• RMS Power: 300 Watts(1200 Watts Peak)
• Impedance: 4 + 4 Ohm
• Black Aluminum Enclosure 
• 83dB

Factory Refurbished

10″ Subwoofer Enclosure with Built-In 300 Watt Amplifier

10" Down-Firing Shallow Subwoofer Enclosure 600 Watts

Designed to add magnificent bass to vehicles with minimal amounts of room for larger sized subs and boxes.

The EN-DF10 utilizes a 10 inch subwoofer in a compact enclosure
(sized at 20” x 11” x 6”) to help extend and elaborate the bass for your music!

This subwoofer requires an external amp to feed the 300w RMS 600w Max it needs at 4 ohms. This unit fits behind most conventional car seating, rear cubby, or small sized storage compartments so you can have clear and vibrant bass without sacrificing massive amounts of space.

This enclosure housed subwoofer is sure to bring nothing but good vibes when the beat drops.

Highlights

• Compact design allowing endless options for placement in areas with minimal space.
• Specially designed 10 inch subwoofer that maximizes bass response in spaces that are not typically designed for subwoofers.

12" Single Shallow Sealed Downfire

TRUCK CAB GUIDE

Atrend 12AME 12” Single Sealed / Shallow Mount / Down Fire Subwoofer Enclosure

• Pro Tuned 12” Single sealed, down fire, shallow mount subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers.
• ¾.” High-Grade MDF Front Baffle for Ultimate structural rigidity and no-flex construction.
• 0.47 Cubic Feet Net Volume internal air space is ideal for tight accurate bass reproduction.
• CNC Miter & Dado design and construction for the ultimate in an airtight precision fit of all parts which ensures a rattle and noise-free environment.
• Recessed Side Panels increase structural integrity, eliminates unwanted flex and vibration.
• Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
• Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
• Premium OEM Grade Carpeting for factory look and durability.
• Enclosure Dimensions Sub Cut Out: 11.125”, Mounting Depth: 4.5”, Height: 14”, Width: 19.75”, Depth: 7”

10" Single Shallow Sealed Downfire

TRUCK CAB GUIDE

Atrend 10AME 10” Single Sealed / Shallow Mount / Down Fire Subwoofer Enclosure

• Pro Tuned 10” Single sealed, down fire, shallow mount subwoofer enclosure designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers.
• ¾.” High-Grade MDF Front Baffle for Ultimate structural rigidity and no-flex construction.
• 0.47 Cubic Feet Net Volume internal air space is ideal for tight accurate bass reproduction.
• CNC Miter & Dado design and construction for the ultimate in an airtight precision fit of all parts which ensures a rattle and noise-free environment.
• Recessed Side Panels increase structural integrity, eliminates unwanted flex and vibration.
• Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
• Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
• Premium OEM Grade Carpeting for factory look and durability.
• Enclosure Dimensions Sub cut out: 9.125”, mounting depth: 4.125”, Height: 12”, Width: 19.75”, Depth: 6”

15" Single Vented Black Carbon Fiber

• 15" Single Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Total box volume: 4.75 cubic feet
• Dimensions: 19-1/2"D x 29"W x 18"H

Why Choose GFX/Carbon Series Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

10" Single Vented Black Carbon Fiber

• 10" Single Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Total box volume: 1.75 cubic feet
• Dimensions: 14"D x 16"W x 18-1/4"H

Why Choose GFX/Carbon Series Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

12" Single Vented Black Carbon Fiber

• 12" Single Vented Subwoofer Enclosure
• Carbon Fiber Painted Finish
• Ultra plush black carpeting
• Silver spring loaded terminal cups
• 3/4" MDF construction
• Completely Miter and Dado panel
• Total box volume: 2.40 cubic feet
• Dimensions: 18-1/4"D x 18-1/4"W x 16-1/4"H

Why Choose GFX/Carbon Series Atrend?

From design to delivery, Atrend products are tested vigorously to ensure sound quality and accurate engineering. Working with only the latest in computer automated software and machinery, Atrend continues to be a trend setter in the marketplace. Atrend delivers quality results by utilizing only the most efficient engineering and manufacturing processes.

Miter & Dado Construction

All of our Atrend and Bbox subwoofer enclosures are engineered and constructed to be the strongest on the market. Our outside panels feature our signature Miter and Dado construction, which adds extra reinforcement and structural integrity to our subwoofer enclosures. Ultimately, these construction techniques provide unsurpassed build and sound quality in Bbox enclosures.

• Mitered Edge Construction Provides A Cleaner Finish and a Tighter Seal
• Miter Joints Feature Over 41% More Surface Area Compared to a Traditional Butt Joint
• More Surface Area Translates Into A Stronger Bond
• Dado Joints Offer An 80% Increase in Surface Area Compared to Traditional Butt Joints
• Unsurpassed Shear Strength To Withstand Even The Hardest Hitting Subwoofers
• Precise, High Quality Fit and Finish

Attention to Detail

3/4" MDF Construction - Atrend feature high-quality 3/4" MDF panels to withstand the deepest bass.

Atrend's Trick Glue - Our Enclosures are built using Atrend's special blend of Trick Glue for up to 3600 PSI of holding ability while maintaining a flexible and durable seal.

Premium Plush Black Carpet & Terminal Cups - Premium Plush Black Carpet is standard on all GFX/Carbon Series Enclosures

15" SINGLE PORTED SPRAYLINERED SUBWOOFER ENCLOSURE

12" SINGLE PORTED SPRAYLINERED SUBWOOFER ENCLOSURE

10" SINGLE PORTED SPRAYLINERED SUBWOOFER ENCLOSURE

15" SINGLE HEAVY PORTED SUBWOOFER ENCLOSURE

12" SINGLE HEAVY PORTED SUBWOOFER ENCLOSURE

10" SINGLE HEAVY PORTED SUBWOOFER ENCLOSURE

12" SINGLE TRUCK SEALED SUBWOOFER ENCLOSURE

10" SINGLE TRUCK SEALED SUBWOOFER ENCLOSURE

15" SINGLE REGULAR PORTED SUBWOOFER ENCLOSURE

12" SINGLE REGULAR PORTED SUBWOOFER ENCLOSURE

10" SINGLE REGULAR PORTED SUBWOOFER ENCLOSURE